Since 1939 · Somma Lombardo (VA) +39 0331 256314 [email protected]

What is Bakelite?

Bakelite is a thermosetting phenolic resin: the first fully synthetic plastic, invented in 1907. It is still used today as an electrical insulator and for mechanical parts.

Bakelite (bachelite in Italian, Bakelit in German) is a synthetic resin made by reacting phenol and formaldehyde. When heated under pressure it hardens irreversibly, which is why it is called thermosetting. The result is a rigid, insulating and heat-resistant material that neither melts nor softens again.

Isotessile has manufactured it since 1939 in Somma Lombardo, Italy, in the form of laminates: phenolic paper and cotton phenolic sheets and turned rods.

History and origin of the name

Bakelite was invented in 1907 by the Belgian-American chemist Leo Baekeland, after whom it is named. It is considered the first fully synthetic plastic, that is one not derived from natural materials as celluloid is.

From the 1920s to the 1950s it was everywhere: telephones, radios, switches, sockets, handles, costume jewellery. That is why today “Bakelite” mostly brings vintage objects to mind. In industry, however, it never disappeared, because as an electrical insulator and engineering material it still performs very well at low cost.

Properties of Bakelite

The exact properties (dielectric strength, flexural strength, water absorption…) depend on the reinforcement and the grade: you will find them in the data tables on our product pages.

Phenolic paper and cotton phenolic

Today’s technical Bakelite is almost always a phenolic laminate: sheets of a reinforcing material impregnated with resin and hot pressed. The reinforcement changes the performance:

  Phenolic paper Cotton phenolic
Reinforcement paper cotton fabric
Main strength electrical insulation mechanical and wear resistance
Typical uses panels and bases for switchboards, spacers, punched parts quiet-running gears, bushings, guides, bearings
Isotessile thicknesses 0.3 to 40 mm 0.3 to 100 mm and more

In addition to sheets we make cotton phenolic turned rods. The reference standard for the sheets is EN 60893 (IEC 60893).

What Bakelite is used for today

Can it be cut and machined?

Yes. Bakelite sheets can be sawn, drilled, milled and turned with tools for metal or hardwood. Use fine-toothed blades, ideally tungsten carbide, and feed without forcing so as not to chip the edges. Bakelite cannot be welded or hot bent like thermoplastics: shapes are made by removing material.

To work safely, simply extract the dust and wear a dust mask. If you do not have the equipment, we cut the sheet to size for you, even a single piece and for private customers too.

Frequently asked questions

Is Bakelite a plastic?

Yes. It is a thermosetting plastic: once cured by heat and pressure it no longer softens and cannot be remelted, unlike thermoplastics such as PVC or polyethylene.

Is Bakelite toxic?

Cured Bakelite is a stable material and can be handled without special precautions. Care is needed when machining it: dust from cutting, drilling or sanding should not be inhaled (use extraction and a dust mask), and the material should not be burned, because combustion releases irritating fumes.

Bakelite, bachelite, Bakelit: what is the difference?

None, they are the same material. Bakelite is the original trade name, from the surname of its inventor Leo Baekeland; bachelite is the Italian spelling and Bakelit the German one.

How do you cut Bakelite?

With a fine-toothed saw, ideally with a tungsten carbide blade, feeding without forcing so as not to chip the edges. Drill it with metal drill bits. When machining, extract the dust and wear a mask. Alternatively, we can cut the sheets to size for you, even a single piece.

Where can I buy Bakelite?

Phenolic paper and cotton phenolic sheets and rods are sold by phenolic laminate manufacturers such as Isotessile. We also sell to private customers and in small quantities: you can request a quote from the page Bakelite cut to size or through the contact form.