Since 1939 · Somma Lombardo (VA) +39 0331 256314 [email protected]

Cotton phenolic sheets, grade G

Grade G cotton phenolic sheets
Grade G cotton phenolic sheets
Fabric
cotton, 26 threads/cm²
Thicknesses
0.5 to 100 mm and more
Sheet size
approx. 1070 × 1070 mm
Colour
natural; black on request, minimum quantity to be agreed

Grade G cotton phenolic is a laminate of pure cotton fabric (26 threads/cm²) impregnated with thermosetting phenolic resins and cured. It combines high mechanical strength with good dielectric properties.

Applications

It is used for quiet-running gears, camshafts, bushings, rolling mill bearings, compressor vanes and parts for the electromechanical, electrical and mechanical industries. It is the grade with the coarsest weave in the range.

Other cotton phenolic grades

Grade M (40 threads/cm²) · Grade F (44 threads/cm²) · Grade FF (60 threads/cm²)

Equivalent standards

  • CEI EN 60893
  • Type "G", CEI - UNEL standards
  • Grade C, NEMA standards
  • Type HGW 2081, DIN 7735
  • Type C, BS 972 : 1941

Technical data sheet

GRADE "G" 26 threads/cm2
Colournatural
Insulation classE, 120 °C
Density1.4 g/cm3
ThicknessesTolerances to UNEL table 02612
Water absorption2%
Heat shock test (1 h at 160 °C)good
Resistance to mineral oil (72 h at 120 °C)good
Flexural strengthN/cm2 ≥ 10000
Compressive strength
perpendicular to laminationsN/cm2 ≥ 20000
parallel to laminationsN/cm2 ≥ 15000
Impact strength
perpendicular to laminationsN/cm2 ≥ 300
parallel to laminationsN/cm2 ≥ 200
Tensile strengthN/cm2 ≥ 5000
Cleavage strengthN 6000
Rockwell hardness (F scale)≥ 46
Voltage test
perpendicular to laminationskV 10
parallel to laminationskV 18
Insulation resistance between pinsMOhm 103
Flammability, UL 94 (horizontal)class HB, slow burning
Tests carried out on samples:10 mm thick
Reference standards:CEI - UNEL
Sheet composition: pure cotton fabric, phenolic resin

The data shown are measured on material from normal production and may vary slightly.